There is a wide variety of drainage pipes to choose from when handling plumbing in your home. The pipes come in different sizes and made from different materials. There are several factors that must be considered when choosing drainage pipes. The most common determinant is the location where the pipe will be installed.
Underground drainage pipes may be slightly different from the regular pipes. They are made from materials that are tough and resistant to the harsh soil conditions. This is done to ensure that the pipes stay durable for the longest period possible without the need for replacement. If you are considering going for drainage pipes for your home here are a few tips that can help you in choosing the right pipe.
Check on Flow Capacity
Drainage pipes need to have a slightly large diameter to allow easy flow of the components being transported and to avoid getting a blocked drain too often. Using pipes that have very small diameters may not turn out as well as this will create a lot of pressure in the pipes. The buildup of pressure may cause the pipes to burst leading to further complications in the drainage system. The flow capacity may also be determined by how smooth the inner walls of the drainage pipe are. Pipes with smooth wells are the best for drainage as there is less friction between the fluid and the pipe. This facilitates the smooth flow of fluids even if the pipes are installed in a flat area.
A good drainage pipe should have a high resistance to corrosion. In most cases, drainage pipes are buried underground. The conditions in the soil may at times be very corrosive especially if the soil has acidic properties. When dealing with such types of soils it is advisable to use PVC pipes. This category of pipes is resistant to any form of electrochemical reaction. Acids and bases that may be present in soil have less effect on them. This reduces the need to replace the pipes or conducting pipe relining every so often. It is for this reason that most drainage pipes are made from PVC material.
Consider Impact Strength
Drainage pipes need to be highly resistant to any form of impact. This is because they are often installed in places where requires them to be durable. Using weak pipes will result in constant damage to the drainage system. Metal pipes are known to be resistant to external pressure and are therefore very good at handling simple weights. PVC pipes also have high impact strength and can be used in the place of metal pipes. In as much as clay and concrete pipes may be good, they have a low impact strength and can break easily when pressure is applied to them.
The amount of money used in installing drainage pipes may vary depending on the type of pipe being used. Some pipes may require heavy equipment to install which may result in high operational costs. Others may also need additional manpower for them to be installed properly and all this may require money. When choosing a drainage pipe, ensure that you go for one that does not require additional installation cost. There are drainage pipes that can easily be installed by using plumbing glue and other plumbing adhesives.
Resistance to Wear and Abrasion
When choosing a drainage pipe, it is important that you go for one that is tough and durable. Pipes are prone to wear off; with time, you may find yourself replacing them every now and then. This can be avoided by going for drainage pipes that are made from strong materials that can last for years. Replacing pipes especially underground drainage pipes can be very costly. You can save on the plumbing cost by choosing the right pipes. It is for this exact reason that the materials used in the construction of a drainage infrastructure projects are made of durable materials as replacing or repairing the pipes can be very costly.
In general, here are the 3 most common materials for pipes used in the plumbing industry.
Stainless steel may look very neat, but it is very costly. Stainless steel pipe is used in regions subject to rust and near coastal areas. This type of pipe is offered in both rigid and flexible and will require some special couplings to be connected to other types of pipes. They are also durable, and for that reason it is among the popular materials used in the civil engineering field as far as plumbing is concerned. Don’t confuse stainless steel pipes using galvanized pipes. It’s offered in assorted sizes and lengths.
Copper pipes are most likely the most traditional plumbing pipe used due to their extensive length and dependability. They supply superior corrosion resistance, great substance for use for hot and cold water, and it could be handled easily. However, the most significant factor to consider prior to using aluminum piping is that it needs to be soldered together and it may require extra fittings. Not everyone is good at soldering copper pipes, so speak with a plumber.
PVC plumbing pipes are used for cold and hot potable water in addition to sewage applications. PVC pipes differ in their thickness and configuration depending upon the application where it will be used. For example, pressure water pipes, aren’t exactly the same as sewer pipes rather than exactly the same as those used in storm drainage systems. Plastic plumbing products designed for potable water programs are usually designated with “NSF-PW” or”NSF-61″ to signify that the item complies with the health impacts requirements of NSF/ANSI Standard 6.